incra ts ls table saw fence 52
1996-2023, Amazon.com, Inc. or its affiliates, Select a location to see product availability, INCRA LS32-TS Table Saw Fence - Good but Overpriced, Reviewed in the United States on February 9, 2014. I actually spoke to a real person each time I called and was treated like royalty. In summary, the Incra system is a huge upgrade from most cheapo fences that come standard on contractor saws. This kind of accuracy allows you to just be plain silly with the kind of detail you can put into pieces. I found that it was well packaged for shipment, arrived in a timely manner with all parts in excellent condition, and with good instructions for assembly. It has leant some insight and made me make some critical and hard decisions. INCRA TS-LS Table Saw Fence - 52" Range The 52" (1320mm) -capacity TS-LS System uses 92" rails and either a 32" or 810mm LS Positioner. The repeatability is the big thing for meit saves me time and material, in that if I screw up a piece and need an exact duplicate, the fence allows you to make itI rarely cut extra pcs while creating a project due to the ease of the repeatability. I have not re-installed the Inca fence (yet) to my saw as I just cant spare the extra 3-4 feet right of the wings. And I suppose the cardboard shim issue is a negative result of me waiting so long to write my impressions. If you do this it makes the Incra Fence a lot more stable and the wings are better supported. The only thing great about this fence is the micro adjust and to be fair it's awesome. Crap. Im a Mac guy too (as I type on my IBM). I remember speaking with a viewer who had similar issues with the fence and he did call tech service and I believe he was told to shim the fence. Thanks for the heads up Marc, hey while we are on the subject, do have a recommendation for a good/acurate/affordable miter gauge for my PM 64A??? These cookies help provide information on metrics the number of visitors, bounce rate, traffic source, etc. I currently have a T-square fence from MuleCab which works quite well. Are you still using that and how has it worked out for you if you are still using it? Its a magnificent device that allows accurate joinery. Even if we assume the fence alignment was a defective part or a defective user, I found that the system was a bit cumbersome in-use. As a final option, Incra offers as an option a set of 92 inch rails so you can have still have 16 inches to the left of the blade, nearly 50 inches to the right, or a whopping 70 inches of rip capacity with the longer rails mounted all the way to the right. You also have the option to opt-out of these cookies. I never claim to be a real reviewer. I dont have standardized testing procedures and I really dont care to. Zeroing the fence takes no tools and 30 seconds of your time. Again, it just never felt reliable when it was locked down. The standard TS-LS (LS52-TS) covers saws measuring 28" or smaller front-to-rear. ;-). It does not store any personal data. Here is a link to my post at SMC. Whats right for one may not be right for another. Thought I'd just post a note about how this fence is doing a year after I purchased it. Forget all this testing, measuring, and over-analyzing, lets make some real cuts! If not then you will have to manufacture/make a miter slider to connect to the Ibox. This product is very well made and sturdy. haha. John. Click here to view our INCRA Table Saw Systems Comparison Chart, Please Note: Table Saw shown in images not included. The limit on ripping is not a problem for me as I tend to do that with a straight edge and my little P-C finish saw. The positioning range is 52" to the right and 14" to the left of the blade. I just purchased this fence today on ebay and should have it next week. Call Us Today! Dan. with any 10" table saw, with no drilling, no tapping and no modifications. Its a milestone in my woodworking saga. The saws top must have flat, vertical surfaces on both the front and rear for the (4) adjustable Incra rail mounting brackets to bolt against two brackets at the front and two on the rear. How about these positioning fences as compared to say a standard good t-square fence with the Wixey digital readout system add-on. Larry. I am not in any all fired hurry to buy the Incra but Ive always eyed them. Last month (April) I received the Incra TS/LS (LS32-TS) fence system. Simple, patented lead screw-based mechanics instantly position the fence in 1/32 steps +/-0.002 (1mm +/- 0.05mm for metric versions) with perfect repeatabilityyou cant miss! In my shop, a real chance entails using it. Im sure the Incra fence system works well for a lot of people. I have become convinced anything Incra makes will be the best, most precise woodworking product available. If you have a left-tilt saw and do not need to use the fence on the left side of the blade, then the main rails can be mounted further to the right. accommodate hold downs and wooden sub fences, Adjustable brackets for straightforward installation on a huge variety of table saws, Two preset locations for the LS32 positioner provide 52 right-side ripping capacity with 14 of left-side capacity, Expandable in the future with router tables & accessories. And of course this is pre-Biesemeyer buyout by Delta. These brackets also ride above the table saw The fence skims above the table on whisper smooth glides, eliminating all fence to table contact. I am an Engineer and find it hard to understand why these systems are built/designed in a way to make it difficult for the end users to have a positive experience right out of the box. Greg, I would be interested in hearing more about increasing the rip capacity without moving to the 90 inch [!] On another note though, the entire thing is made out of aluminum and its going to not be quite as strong as the steel setups like a bies or unifence. TS-LS Joinery System, 32" Range, Incra LS32-TS-WF-XL. Each time you pull the LS32 positioner's red locking lever, the lead screw mechanism instantly snaps the fence to the dead centre of the nearest 1mm increment with an accuracy of +/- 0.05mm. Spectacular fence, be patient with installation, Reviewed in the United States on June 30, 2015. The fence is pricey but just think 1/32 and anywhere in between theres not a fence iv see that does that. The problem I face is finding a table saw to buy (I dont own one yet) that meets the specifications for the ibox. The Incra rides on the main rails on 2 fence glides that attach to the back of the fence (pictured in the third photo that you posted). The views and opinions expressed on this blog are purely our own. Is this something you have considered, tested or possibly already done? @ Everyone My experience with Inca products has been fantastic. When adjusted properly, there is no weight to speak of that is supported by the arm. Three pairs of stops on the rails maintain perfect alignment & calibration each time its moved. However, I dont agree with your assessment and I think that Greg hit the nail on the head with his post. Coupled with the fact that I still wasnt confident in the fences ability to lock down parallel to the blade, things werent looking good. It sounds like I made the right decision, thanks for the blunt and straightforward review. Ive owned my TS-III for about 15 years and I just upgraded it to the LS. That would be a huge cost savings. At that point you can use the little click wheel to make adjustments down to 0.002. I have to say that i think the incra fence is bad ass. The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. The amount of screws you get when you purchase this is kind of absurd. I hate repeat fussing. Reviewed in the United States on February 23, 2016. I finaly finished my custom cabinet I am now making cabinets for the laundry room i had to remove the fence three times to rip some full sheets of plywood replacedfence and its right on within a couple of thousants if I had the room I WOULD HAVE. I don't think in my work shop it was worth the investment. Drills and Jigs, back This INCRA TS-LS Table Saw Fence System uses the 810 mm LS Positioner and a pair of 72 inch (183 cm) rails. Adjustment from the short to the long rip postion takes about 10 seconds, loosen 4 knobs, slide the carriage to the other set of stops, tighten the knobs. I guess the simplicity and reliability of a T-square fence are more my speed. This product is very well made and sturdy. Routing, back So I can see where you decided to raise the white flag and bail. Please do me a favor, and read the entire thread from page 1, listen to everything that I have to say about the Incra fence, and I have Powermatic equipment PM66 5hp, 8 jointer, and hollow chisel mortiser stand up station and love them. Sorry Karlen. The 52"/1320mm-capacity TS-LS is based on a 92" rail and an LS32 positioner. I am considering the incra because of the repeatability and the joinery options included with it for a built in router table, and with the one long rail I think it would do the trick to keep everything a bit more flat. I installed it on my Powermatic saw. The cookies is used to store the user consent for the cookies in the category "Necessary". INCRA Base Mount Unit and TS-111A Rip FenceThe INCRA Base Mount Unit and TS-111A Rip Fence includes a 36" computer-machined rip fence, locking fence glides, positioner base support assembly, all the required brackets and hardware for your table saw system. This feature alone is worth its weight in gold! That is a nice fence, but the fact that you couldnt trust it..that would bother me more than any other issue. So locking the fence down for a cut is a two-step process. I also have found that all blades are not the same. Based on the other issues I had with it, I had no desire to get the longer unit. I believe I will just leave it on the old contracters saw and include it when I sell it. INCRA TS-LS Table Saw Fence - 52"/1320mm Capacity, The 52"/1320mm -capacity TS-LS is based on 92 aluminum main rails and a 32-travel LS Positioner. I wasnt considering one but wondered what happened. It also requires more room to allow for the carriage. Scrapers, Files and Rasps, back The Incra TS-LS table saw fence is perfect for those who don't need a table saw router or are only interested in upgrading thier existing fence to the most accurate system on the market. Especially given Marcs observation that the real capacity of the standard unit is closer to 29 inches, the appeal of the standard unit is quickly fading for me despite all the benefits. I mean, at one point we just started laughing while Not sure what all the hype is about here. Also, I dont necessarily have to cut every like setup at the same time, like you would have to do with a normal fenceI can cut the project pcs in the order I build rather than size order, if you get my meaning. I spoke with you in the past, and appreciate you taking the time to get back to me. INCRA LS32 Positioner Only 810mm (Metric)INCRA's LS32 Positioner is designed specifically for table saw use in conjunction with an INCRA TS Rail System, and is thelargest fence positioner of the LS family. Workshop Essentials, back The "XL" version fits most of the newer 10" & 12" cabinet saws with deeper tops measuring 33.5" or less using a longer fence and base support . Two capacities available: The 32" (810mm)-capacity TS-LS is . Im a big Incra fan. Unlike the video I saw online where the guy just lifts off the entire fence and drops it into a new spot and starts cutting again, we had to re-square the blade to the mitre slot every time we moved the fence from the 32" to 52" position. I expecially like the micro-adjust feature. Marking and Measuring, back Today I had to rip a 27 & 15/16 section of plywood and honestly lost a few moments as I had forgotten how to do that with my stock fence and ended up ripping it 3 times, each time tapping a little to the left to get the cut right. When you tighten the glides, the buttons are forced to contact the rail, which distorts the fence slightly. My cabinets and other projects are a lot better and square now. Marc, I know your from the old school, but my table saw was built in 1946 and I was lucky to get within a 1/4 of what I wanted for a cut. Compare. So I will lock the fence near the miter slot, check with my finger, unlock the fence, slide it back and forth, then lock it down again and test with my finger. Base Mount Unit and TS-IIIA 36" Rip Fence - Dismounts for cross-cutting operations and remounts in less than 10 seconds. v/r Its not handy. How cool is that?! However, there are millions of products and services on the web, and I only promote those products or services that I would use personally. These cookies track visitors across websites and collect information to provide customized ads. Be the first to know of exclusive discounts, offers, and promotions available. But it sounds like you had about as much luck with that fence as I with Deltas sliding table attachment that I spent 300$ on and then had to readjust it at least once a year to keep it halfway accurate. The Wood Whisperer, The Wood Whisperer Guild, TWW, and TWW Guild are trademarks of The Wood Whisperer Inc. All rights reserved. Its dead on for every cut. I have a Mac and an Incra. The included DVD is a great visual on how this works. I slide my fence back and forth all the time and it *always* returns to completely parallel and absolutely the same position. An accurate and reliable fence is absolutely necessary. and to treat them equally, I bought another 32 TS-LS for my other sons saw and installed it the same way. Create your account and enjoy a new shopping experience. Personally, I never moved it from side-to-side and routinely made left side cuts with complete (and unthinking) accuracy. Make the initial cut, move the fence to give the exact dimension of the desired groove (don't forget to account for thickness of the saw blade), make the second cut and clean out any waste in between. I am an accountant and just got into woodworking as a hobby. So everytime, I go from 32 to 52 I have to recalibrate everything. I can measure with calipers and cut once. Also, the YouTube videos on Incra's site would have you believe there is only one set of screw you'll need to fiddle with in order to square the fence and thats not really true especially if you move your fence from the 30" to 52" position a lot like we do. It does set up for cuts easily. Analytical cookies are used to understand how visitors interact with the website. (by the way my table saw was made in 1946.) I do it this way because that initial setup gives me an opportunity to quickly test the fences ability to lock down consistently each and every time. Don't be put off by its appearance! :). Rips are are within a few thousandths of the setting. How would you have known if you didnt try the thing out.. accommodate hold downs and wooden sub fences, Adjustable brackets for straightforward installation on a huge variety of table saws, Two preset locations for the LS32 positioner provide 52 right-side ripping capacity with 14 of left-side capacity, Expandable in the future with router tables & accessories. Love it. I have the Accu fence and love it as well. Compare. Lifting . It is very expensive! Thanks. Open Box. Just clamp a known width piece of wood to the Incra rip fence ensuring that it doesn't extend beyond the front of the blade to avoid pinching. It seems to me tool and accessory opinions are very similar to the Mac/PC debate. Id be lying if I said I wasnt second-guessing my own experiences. I would call mark at incra about compatability with your sliding table arrangement he is great to work with. I used to have the Ridgid R4512 (hated it) and it did work with the Incra I Box system. It performs just as advertised, Reviewed in the United States on December 9, 2016. Marc thanks for sharing your experiences with us. Is order a braket for every hole on your table saw. One of the great features of this system is the micro adjustability. The XL version uses a longer fence and base support panel to fit most of the newer 10 & 12 cabinet saws with deeper tops measuring 33.5 or less. Youre probably right in saying that the Incra fence just isnt for you. And a fence with so many adjustments has an equal number of things that can go wrong with it. I guess I come from the school of thought that a fence should not be that much trouble to adjust and set up. The other answer is a purpose built router table. I truly believe the fence aligns perfectly every timeat least in my eperience. Receive the latest updates about our products and promotions. evn73 (2,111) 99%. Workshop Equipment, back I havent seen anything on the incra site that says you can het up to 48 inches of rip capacity. So, when you didnt feel certain, and you measured, was the fence off? Of course in my opinion a table saw fence is like anything else, it has to fit ones workflow, budget and personal preferences. Hopefully most who were looking at the Incra caught the telling aspects of reviewer user aptitude of which there were several. The General Compatibility Chart lists the various categories of saws, and the, INCRA TS-LS Table Saw Fence - 32" Range (LS32-TS), INCRA TS-LS Table Saw Fence - 52" Range (LS52-TS), Click here to watch the LS Positioner Intro Video, Click here to watch the TS-LS Demo - Part 1 of 3, Click here to watch the TS-LS Demo - Part 2 of 3, Click here to watch the TS-LS Demo - Part 3 of 3, Click here to watch the TS-LS Table Saw Fence Video (from New Woodworker). The standard TS-LS (LS52-TS) covers saws measuring. Lets face it the saw turns the blade thay all do but if you dont have a good miter or fence its just junk. But I miss it. Many of you soon noticed that I was back to my old Powermatic fence shortly thereafter. :) I certainly could have lived with the Incra and maybe eventually gotten used to it. It is an investment, but it has allowed a substatial expansion of what I can do with a router. Thanks for reading (start crooked and it will end up crooked). But opting out of some of these cookies may affect your browsing experience. Reviewed in the United States on June 28, 2016. Just when I thought this was going to be easy. I had considered trying the Incra. Reviewed in the United States on August 25, 2011. And analyze just how I use a table saw and whether an Incra fence meets those needs. Im still looking for more reviews and will update you as I make up my mind. The fence that comes with is is a very good fence. As they say, YMMV (Your Mileage May Vary.). Now with the Incra Fence, Im within 1/32 and I really like the repeatable fence setting. Cutting wood to metal tolerances may seem like overkill until you recognize that the thickness of any plywood you buy these days is "nominal." Did you give Tech Support at Incra a chance to help you out? I didnt have any problems getting mine perfectly aligned when I set it up but it was (and still is) a comfort to know that I can tweek it in many ways if needed. Click to download INCRA TS-LS Table Saw Fence Video in Windows Media format. Now *that* would be cool. I thought it would be handy to put a router table out to the left of my saw. This cookie is set by GDPR Cookie Consent plugin. Lifting the red locking lever causes the patented steel lead screw positioning system to instantly snap the fence to the dead center of any multiple of 1/32" with an accuracy of 0.002". The standard TS-LS (LS52-TS) covers saws measuring 28" or smaller front-to-rear (measured along the miter slot). but as long as you zero the fence to the blade each time after you move the base clamp your going to be dead on the reading it gives you. So if you wanted 50 from 72, subtract 22 (minus) an 1/8th for the blade, making sure to support your piece on the left side of the blade. I just got one of these today and spent a bunch of time setting it up, but I havent seen the drooping you have been talking about. However, Im relieved to read this article because I thought I was crazy. The XL version fits most of the newer 10 & 12 cabinet saws with deeper tops measuring 33.5 or less using a longer fence and base support panel. Each time you pull the LS32 positioners red locking lever, the lead screw mechanism instantly snaps the fence to the dead center of the nearest 1/32" or 1 mm increment with an accuracy of +/- 0.002"in non-technical terms, thats accurate enough to split a sharp pencil line into a dozen equal parts. These cookies will be stored in your browser only with your consent. Thats not an accident. Hand Tools, back I am also an engineer, and love this fence for its accuracy and repeatabiltiy. 1) Alignment off when clamping the fence. INCRA TS-LS Table Saw Fence - 52"/1320mm Capacity * Table saw not included * Larger Photo Email A Friend Alternative Views: The 52"/1320mm -capacity TS-LS is based on 92" aluminum main rails and a 32"-travel LS Positioner. Find helpful customer reviews and review ratings for INCRA LS52-TS TS-LS Table Saw Fence 52-Inch Range at Amazon.com. I truly believe that if he had given this tool a REAL chance, he would have quickly solved his initial problems and would have been a true advocate of the value of this set-up in any woodworking shop. Theres no guesswork, period. Very accurate. I thought it would be a great test for the new fence. I had to be just as accurate. Its quick and dirty but it tells me a lot about the behavior of the fence. I recently moved and have a smaller setup than before. rails. You can dial in the cut quickly. I am a professional woodworker, making Handcrafted wooden Jewelry Boxes. Please let us know if you are unhappy with a purchase for any reason and we will do whatever we can to make it right for you. I have not experienced any issues with the fence. Hey Jason. I would say if you have the room for it and the dinero, go for it. +(91)-9821210096 | where is bobby dassey now 2020. was margaret lockwood's beauty spot real. The saws left-to-right width wont matter for systems not equipped with router tables. One negative thing I an say about it is that when you are set up for ripping large cuts the sliding part of the adjuster sticks out another 25 or so. The only issue I have with the Incra is dealing with the backlash in the leadscrew. Marc, you gave a fair review from your perspective. Not sure what all the hype is about here. Two capacities available: The 32" (810mm) -capacity TS-LS is based on 72" main rails, the 52" (1320mm) -capacity on this page system uses 92 rails, and both systems use the same 32" -travel LS Positioner. The INCRA LS52-TS TS-LS Table Saw Fence is designed with automatic positioning control to ensure complete accuracy and avoid long-set up times. It is a direct replacement for the Ultra positioners used with the INCRA TS-II and TS-IIIA Fence Systems, and when equipped with the appropriate sub base, the LS32 can also serve as the foundation of a super-sized, custom router fence system. It sounds dumb to spend almost $400 on a fence for a 60 year old Craftsman table saw purchased on Craigslist for $80. I am a home woodworker and have had an Incra LS for several years on my old Rockwell table saw. I appreciate the review and your candor. I have had a very positive experience with the Incra Fence, the Incra Tech Support, and the company I purchased the fence from, Woodpeckers. I assumed it was me just being a doofus or not getting enough sleep but it sounds like maybe Im not. Im wondering if theres a conterpart fence which is more like a Mac accessory. I have a very old, but great Craftsman table saw with a fence that needs to be burnt, so Ive been looking at a lot of different fences, Incra TS was one of them. Thanks for are all your great work and YouTube videos. >> more, Copyright Taylor Design Group, Inc. All Rights Reserved. Since Marc is a Mac person, Im not surprised he wasnt happy with the Incra fence. The locking system is still the same type youd find on any other t-square style fence so nothing different there. I really think I did good with the Incra Table Saw Fence. Once the setup is done for a particular bit, changes to the fence are way faster than the stock fence. @ Marc I too am surprise that your experience wasnt what you expected. Ive used Beisemeyer and the other high end fences and they all leave me having to do check cuts and multiple adjusting to hit a repeat setup to match a prior cut. Before I go into the details, I would first like to talk about product reviews. Marc, I really think your fence may have been defective. Perhaps that would be the Biesmeyer and its clones. This allows fence positioning far beyond what's possible by eyesight alone, and fence setups are instantly repeatable. 09.03.2014 Best table saw for the money 2012,home depot power tools for sale philippines,saw blades harbor freight 02792 - Plans On 2016. So why did I upgrade the fence in the first place? $884.95 $731.59. You used it and did like it. There are some very super cool fences out there that look pretty nice, but the Incra is what I choose. Jk. Joe sells/works or owns a piece of Incra could he be more obvious! Home; Service. INCRA LS Positioner 32" - The LS Positioner offers rock-solid fence travel of 32". Given this, please assume that any links leading you to products or services are affiliate links that we will receive compensation from. I was a pain getting the front and back rails attached to my old grizzey contractor saw but after that was done that fence worked great and you could have confidence in it. For almost 30 years, INCRA Saw Fences have been the Gold Standard for Accuracy, Repeatability, and Efficiency. I recently upgraded from a contractor to cabinet saw and needed some help. Analytical Services; Analytical Method Development and Validation The magnetic ruler allows for quick resetting of the scale or zero-ing the fence when using auxilary or sacrificial add-ons. As for the table saw fence, I only have one complaint its just too big for small shops, due to the sliding arm. Marc is right. Love it. Hopefully Amazon will take it back and I can get my hard earned $600 back. Now I could certainly live with that if I had no other option, but apparently I had become so accustomed to having full cabinet saw rip capacity, that this was a deal breaker. I am really intrigued by the setup than many people are using with small lightweight jobsite saws, or contractor saws without the legs that are somehow incorporated with a table system. Click to download TS-LS Table Saw Fence - Part 1 of 3 in Windows Media format. Tracks and Channels, back I ma in the progress of converting al my tools and method to a festool setup, AND I am building a torsion box table for doing both sheet goods breakdown and cross cutting major panels. That leaves the more mundane small cuts to my table saw. I just couldnt understand why you would want to go from 50 to 39? If you are inclined to give the Incra another chance, here are some tips to address the concerns that you had. Id hate to go back to using a T-square style fence again! Now I have no idea what system I should purchase. We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. The Reference Scale "floats" in a second channel to indicate distance from the last cut or any other reference point of your choosing. Now, I modified the rail set-up and positioned the rails flush with the left wing of the sawthis gave me an extra six to eight inches right of the blade. 2) Fence droops because the fence is suspended by the arm. Makes it easier that I didnt pay for the unit. The TS-LS is already perfect in measuring increments of 1/32 or 1mm, but when you need to match existing project parts, the large micro-adjust knob turns the lead screw against the mating threads, allowing the fence to move between 1/32 steps with 0.001" (0.025mm) resolution. With any tool in my garage, if its more work to use it then its worth, it gets returned (my rigid router comes to mind, always had to screw with it so I just returned it). The big advantage that an INCRA TS-LS fence system has over current table saw rip fences is quite simple. I am in the market for a new fence for a craftsman saw and I definitely appreciate your review, as well as reading though the comments that others have mentioned. The cookie is used to store the user consent for the cookies in the category "Other. The INCRA Joinery System will save space in your workshop and allow you to add a Router Table extension, transforming your existing Table Saw into a dual-purpose Table Saw and Router Table. These cardboard shims are used during initial setup to set the gap (about .050 inch) between the top of the table and the bottom of the fence. I have yet to use to it's full potential for sure, but I did make test cuts, and even cut 1/32nd slices, like the guy in the instructional video on YouTube did, and sure enough, exactly 1/32nd of an inch for each slice. Your experience will likely save me a lot of time and money by sticking with my MuleCab. Work Holding, back See the TS-LS Compatibility Chart for more information regarding the TS-LS & TS Router Table installations. The Inca fence (with a good blade) is so accurate and repeatable that sometimes you need to think of the typical waste side of the cut to actually be the good side. Does anyone have any thoughts about the Jointech system? Once the initial setup is complete, these shims are not used again. Ive got an old Delta 10 contractor saw and I want to install the Jessem sliding table attachment. An accurate and reliable fence is absolutely necessary. The LS32-TS just didnt work out for me.
Tetragametic Chimerism,
Chicago Stained Glass Museum,
Accident On Michigan Avenue Today,
Anaconda Pve Combat Build No Engineering,
Articles I